WHAT YOU NEED TO KNOW
- Yellowstone’s hottest springs appear blue because water absorbs warmer colors while silica floors and particles reflect or scatter blue light.
- Sapphire Pool reaches nearly 93°C (200°F), exceeding the roughly 72°C (162°F) limit for photosynthetic microbes in Yellowstone’s springs.
- Cooler water allows colorful microbial mats to grow, producing brown, red, orange, yellow, green, and other shades.
- A simulation showed Morning Glory Pool turning blue when its colored microbial mat was removed and pale rock was placed beneath the water.
Morning Glory Pool in Yellowstone National Park was named after a blue and white flower, but a photograph taken by researchers in August 2012 captured a far more complicated palette. Its rim burned orange and yellow before shifting through green and finally reaching deep blue at the center.
That transformation offers a vivid lesson in why Yellowstone’s hot springs take on such extraordinary colors. Microbes play a major role, but water depth, temperature, silica deposits, and the movement of light can all change what visitors see.
According to the US Geological Survey, Yellowstone’s blue pools owe their appearance to several overlapping effects. Water absorbs red light, pale silica floors reflect the remaining light, and tiny silica particles can scatter blue wavelengths back toward the surface.
Water absorbs warmer colors such as red and orange more quickly than blue. As light travels farther through water, more of those colors disappear, resembling the increasingly blue surroundings seen by ocean swimmers as they descend.
Sapphire Pool in Biscuit Basin demonstrates the effect in extremely hot water. Light reflected from pale silica deposits on the bottom must travel back through the water before reaching a visitor’s eyes, allowing the water to alter its appearance along the way.
A 2015 paper also reported that the water scatters shorter, bluer wavelengths of sunlight. Some of that scattered light returns toward the surface, strengthening the pool’s intense blue appearance.
Sapphire Pool reaches nearly 93°C (200°F) at its vent, according to the USGS. That temperature exceeds the roughly 72°C (162°F) limit for photosynthetic microbes in Yellowstone’s springs, preventing colorful microbial mats from becoming established there.
The absence of those mats leaves the water and pale silica floor to dominate the view. For that reason, a brilliant blue spring can provide a visible clue that the water is extremely hot.
Cooler springs can support communities of colored microbes that coat the surrounding rocks. Brown, red, and green mats occur near 43°C (109°F), orange mats appear around 57°C (135°F), and yellow or yellowish green mats grow near 70°C (158°F).
Temperature alone cannot explain every color, particularly in deeper pools. The 2015 paper’s authors cautioned that the temperature guide works only in shallow water because deeper water changes the light before it reaches an observer.
To demonstrate that effect, the researchers created a cone shaped virtual pool lined with a single yellow mat. Light traveled through increasing amounts of water toward the center, and the simulated color shifted from yellow through green before becoming dark blue near the middle.
The result closely resembled the August 2012 photograph of Morning Glory Pool. The major exception was the orange rim, which the researchers said almost certainly came from a different microbial mat growing in slightly cooler shallows omitted from their simulation.
Historic descriptions portrayed Morning Glory as blue, and reports dating from at least half a century ago placed its temperature closer to 78°C (172°F). When the researchers studied it, the water was about 70°C.
At the higher historic temperature, the authors reasoned, a colorful photosynthetic mat could not have grown. When they removed the mat from their model and substituted pale rock like that surrounding Sapphire Pool, the simulation produced a blue pool resembling those earlier descriptions.
The researchers did not investigate why Morning Glory had cooled. They only repeated earlier reports that debris had partly blocked the vents supplying the pool with hot water.
Some milky blue pools in Norris Geyser Basin follow another recipe, according to the USGS. Dissolved silica clumps together as water cools, evaporates, or changes in acidity, producing floating particles that are the right size to scatter blue light.
The effect depends on particle size rather than the material itself. The agency noted that skim milk appears faintly blue because its tiny droplets of fat and protein are roughly the same size as the silica particles.
In the researchers’ simulation, Morning Glory became blue again as soon as its colored mat was removed. The change revealed how strongly a hot spring’s appearance depends not only on the water, but also on the living mats and pale rock beneath it.
Join the Discussion
COMMENTS POLICY: We have no tolerance for messages of violence, racism, vulgarity, obscenity or other such discourteous behavior. Thank you for contributing to a respectful and useful online dialogue.